Catalog of the Welding Products from Hyundai Welding
No. |
Headline |
Section Description |
1 |
It is characterized by a perfect weldability (without gas) and there is no need for a post-heat treatment. (Steel rolling mill rollers, |
|
2 |
It is characterized by a perfect weldability (without gas) and there is no need for a post-heat treatment. (Steel rolling mill rollers, |
|
3 |
It is designed for wear-resistant plates (reservoirs for raw materials transportation and storage: Cr-carbide type) |
|
4 |
It is designed for the parts subjected to intense wear, for example, augers of screw conveyors, wear-resistant plates, bucket teeth |
|
5 |
It is used on wear-resistant pads (crusher rollers, wear-resistant pads, screw augers, centrifugal crusher rollers for coal, |
|
6 |
It is designed for the use in the places of severe wear, for example, cone and body of a cone crusher, valves and pipelines for aggressive |
|
7 |
It is used for surfacing on the parts in order to increase the impact resistance, mass or to obtain a connective surfacing. (Crushing rolls and |
|
8 |
Chrome-nickel alloys, parent metal dilution in order to obtain a deposit metal (Welding of dissimilar metals, cladding |
|
9 |
It has good characteristics during hardening, as well as corrosion resistance like austenitic steel. It is used for hardening rollers. |
|
10 |
It is used for surfacing on the parts in order to increase the impact resistance, mass or to obtain a connective surfacing. (Crushing rolls and |
|
11 |
Surfacing of low-alloyed steels (surfacing: low-alloyed type) |
|
12 |
It is designed for high-strength steels subjected to a process of thermo mechanical hardening or for steels with high creep resistance |
|
13 |
It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers |
|
14 |
It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers |
|
15 |
It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers |
|
16 |
It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers |
|
17 |
It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers |
|
18 |
It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers |
|
19 |
For hardening steel rolling mill rollers made of martensitic alloy. (Steel rolling mill rollers require high strength and wear resistance |
|
20 |
It is used for hardening parts from low-alloyed metal in order to increase their durability during metal-to-metal impact. (crane wheels |
|
21 |
Surfacing or surface hardening of the parts, the metal of which has a little quantity of alloying agents. (crane and mine cart wheels |
|
22 |
It is used for hardening parts from low-alloyed as well as middle-alloyed metals (crane wheels, steering rods, tractor rollers |
|
23 |
A metal-cored type wire, which is designed for welding of AISI 439 ferritic stainless steels butt-to-butt in lower position and angle |
|
24 |
SF-409Ti is a metal-cored type wire, which is designed for welding of angle joints in horizontal position of ferritic stainless steel |