engbanner

Catalog of the Welding Products from Hyundai Welding

No.

Headline

Section Description

1

Supershield 430-O

It is characterized by a perfect weldability (without gas) and there is no need for a post-heat treatment. (Steel rolling mill rollers,

2

Supershield 410NiMo-O

It is characterized by a perfect weldability (without gas) and there is no need for a post-heat treatment. (Steel rolling mill rollers,

3

Supershield CrCW

It is designed for wear-resistant plates (reservoirs for raw materials transportation and storage: Cr-carbide type)

4

Supershield CrCNb

It is designed for the parts subjected to intense wear, for example, augers of screw conveyors, wear-resistant plates, bucket teeth

5

Supershield CrCH

It is used on wear-resistant pads (crusher rollers, wear-resistant pads, screw augers, centrifugal crusher rollers for coal,

6

Supershield CrC

It is designed for the use in the places of severe wear, for example, cone and body of a cone crusher, valves and pipelines for aggressive

7

Supershield AP-O

It is used for surfacing on the parts in order to increase the impact resistance, mass or to obtain a connective surfacing. (Crushing rolls and

8

Supershield 309L-O

Chrome-nickel alloys, parent metal dilution in order to obtain a deposit metal (Welding of dissimilar metals, cladding

9

Supershield 307-O

It has good characteristics during hardening, as well as corrosion resistance like austenitic steel.  It is used for hardening rollers.

10

Supershield 16Mn-O

It is used for surfacing on the parts in order to increase the impact resistance, mass or to obtain a connective surfacing. (Crushing rolls and

11

SC-BU Cored

Surfacing of low-alloyed steels (surfacing: low-alloyed type)

12

SC-A4S

It is designed for high-strength steels subjected to a process of thermo mechanical hardening or for steels with high creep resistance

13

SC-430S

It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers

14

SC-423S

It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers

15

SC-420SG

It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers

16

SC-420S

It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers

17

SC-414S

It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers

18

SC-410NiMoS

It is used to prevent defects and to improve weldability by coating weld metal with flux. (Steel rollers

19

SC-55S

For hardening steel rolling mill rollers made of martensitic alloy. (Steel rolling mill rollers require high strength and wear resistance

20

SC-48S

It is used for hardening parts from low-alloyed metal in order to increase their durability during metal-to-metal impact. (crane wheels

21

SC-45S

Surfacing or surface hardening of the parts, the metal of which has a little quantity of alloying agents. (crane and mine cart wheels

22

SC-30S

It is used for hardening parts from low-alloyed as well as middle-alloyed metals (crane wheels, steering rods, tractor rollers

23

SC-439Ti Cored

A metal-cored type wire, which is designed for welding of AISI 439 ferritic stainless steels butt-to-butt in lower position and angle

24

SF-409Ti

SF-409Ti is a metal-cored type wire, which is designed for welding of angle joints in horizontal position of ferritic stainless steel

Address

Kyiv, Peremohy sq, 65

Contacts

  • Tel.:  (044) 200-80-25
  • Tel.:  (044) 200-85-17
  • E-mail: info@elna.com.ua