engbanner

Flux Cored Strip

No.

Headline

Hardness

Section Description

1

PLAN-101

50 - 56

Surfacing of parts, which operate under the conditions of abrasive wear (grader and bulldozer knives, excavator bucket teeth, rolls of coke

2

PLAN-183

47 - 54

Surfacing of knives for hot metal cutting. Chemical composition: С 0,4; Сг 2,0; Мп 1,6; Si 1,6; Ni 5,5; Nb 0,6; Mo 1,8; V 0,5

3

PLAN-111

50 - 58

Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures

4

PLAN-179

58 - 62

Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures

5

PLAN-185

56 - 60

Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures

6

PLAN-186

57 - 62

Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures

7

PLAN-132-1

18 - 28

Surfacing of parts, which operate under the conditions of contact loads at high temperatures (rollers of roller tracks, rolls, etc). Chemical composition: С

8

PLAN-132-2

28 - 34

Surfacing of parts, which operate under the conditions of contact loads at high temperatures (rollers of roller tracks, rolls, etc). Chemical composition: С

9

PLAN-132-3

35 - 45

Surfacing of parts, which operate under the conditions of contact loads at high temperatures (rollers of roller tracks, rolls, etc). Chemical composition: С

10

PLAN-187

18 - 26

Surfacing of parts, which operate under the conditions of high contact loads (crane wheels, guides, etc). Chemical composition: С 0,2; Сг 11,0; Мп 1

11

PLAN-115

18 - 26

Surfacing of large machine parts in order to restore their geometric dimensions (bell and hopper of blast-furnace charging device

12

PLAN-189

44 - 50

Surfacing of rolls for hot rolling of metal. Chemical composition: С 0,35; Сг 3,0; Мп 0,8; Si 0,6; V 0,3 W 9,0

13

PLAN-190

44 - 50

Surfacing of rolls for hot rolling of metal. Chemical composition: С 0,4; Сг 3,0; Мп 0,8; Si 0,6; V 0,3 W 9,0

14

PLAN-191

46 - 52

Surfacing of rolls for hot rolling of metal. Chemical composition: С 0,25; Сг 5,0; Мп 0,7; Si 1,0; Mo 1,2; V 0,4

Address

Kyiv, Peremohy sq, 65

Contacts

  • Tel.:  (044) 200-80-25
  • Tel.:  (044) 200-85-17
  • E-mail: info@elna.com.ua