Flux Cored Strip
|
No. |
Headline |
Hardness |
Section Description |
|
1 |
50 - 56 |
Surfacing of parts, which operate under the conditions of abrasive wear (grader and bulldozer knives, excavator bucket teeth, rolls of coke |
|
|
2 |
47 - 54 |
Surfacing of knives for hot metal cutting. Chemical composition: С 0,4; Сг 2,0; Мп 1,6; Si 1,6; Ni 5,5; Nb 0,6; Mo 1,8; V 0,5 |
|
|
3 |
50 - 58 |
Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures |
|
|
4 |
58 - 62 |
Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures |
|
|
5 |
56 - 60 |
Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures |
|
|
6 |
57 - 62 |
Surfacing of parts, which operate under the conditions of intense abrasive and gas abrasive types of wear at normal and high temperatures |
|
|
7 |
18 - 28 |
Surfacing of parts, which operate under the conditions of contact loads at high temperatures (rollers of roller tracks, rolls, etc). Chemical composition: С |
|
|
8 |
28 - 34 |
Surfacing of parts, which operate under the conditions of contact loads at high temperatures (rollers of roller tracks, rolls, etc). Chemical composition: С |
|
|
9 |
35 - 45 |
Surfacing of parts, which operate under the conditions of contact loads at high temperatures (rollers of roller tracks, rolls, etc). Chemical composition: С |
|
|
10 |
18 - 26 |
Surfacing of parts, which operate under the conditions of high contact loads (crane wheels, guides, etc). Chemical composition: С 0,2; Сг 11,0; Мп 1 |
|
|
11 |
18 - 26 |
Surfacing of large machine parts in order to restore their geometric dimensions (bell and hopper of blast-furnace charging device |
|
|
12 |
44 - 50 |
Surfacing of rolls for hot rolling of metal. Chemical composition: С 0,35; Сг 3,0; Мп 0,8; Si 0,6; V 0,3 W 9,0 |
|
|
13 |
44 - 50 |
Surfacing of rolls for hot rolling of metal. Chemical composition: С 0,4; Сг 3,0; Мп 0,8; Si 0,6; V 0,3 W 9,0 |
|
|
14 |
46 - 52 |
Surfacing of rolls for hot rolling of metal. Chemical composition: С 0,25; Сг 5,0; Мп 0,7; Si 1,0; Mo 1,2; V 0,4 |