engbanner

Welding Wire

No.

Headline

Diameter

Environment

Section Description

1

PP-Sv-1
TU U28.7-21459234-022:2012

2,8 – 3,0

Self-shielded

The wire is used for welding metal structures from low-carbon constructional steels of the brands St3, St4, 10, 15, 20, as well as at low modes

2

PP-Sv-4
TU U28.7-21459234-022:2012

1,6 – 2,5

СО2

The wire is designed for welding critical metal structures from low-carbon and low-alloyed steels of the brands VSt3sp, 09G2, 09G2S, 10KhSND, 1

3

PP-Sv-8
TU U28.7-21459234-022:2012

1,6 – 3,0

СО2

The wire is designed for welding critical metal structures from low-carbon and low-alloyed steels of the brands VSt3, VSt3ps, 09G2, 09G2S,

4

PP-Sv-29
TU U28.7-21459234-022:2012

1,6 – 2,5

СО2

The wire is used for welding in lower position of low-carbon and low-alloyed steels with σy = 340 – 440 MPa. During manufacture of structural components

5

PP-Sv-54
TU U28.7-21459234-022:2012

1,6 – 3,0

СО2, Аr + CO2

The wire is used for mechanized welding in shielding gases (СО2, Ar + СО2) of critical metal structures from high-strength low-alloyed steels

6

PP-Sv-57
TU U28.7-21459234-022:2012

1,6 – 2,4

СО2, Аr + CO2

The wire is used for mechanized welding in shielding gases (СО2, Ar + СО2) of critical metal structures from high-strength low-alloyed steels

7

PP-Sv-12
TU U28.7-21459234-022:2012

1,6 – 2,4

Self-shielded

The wire is used for mechanized welding without additional shielding of metal structures from  St3, St4, St5, 10, 15, 20 low-carbon steels

8

PP-Sv-12N
TU U28.7-21459234-022:2012

1,6 – 2,4

Self-shielded

The wire is used for mechanized welding without additional shielding of critical metal structures from  St3, St4, etc low-carbon steels

9

PP-Sv-13N
TU U28.7-21459234-022:2012

1,6 – 2,4

Self-shielded

The wire is used for mechanized welding without additional shielding of critical metal structures from low-carbon and low-alloyed steels

10

PP-Sv-14N
TU U28.7-21459234-022:2012

1,6 – 2,4

Self-shielded

The wire is used for mechanized welding without additional shielding of critical metal structures from low-carbon and low-alloyed steels

11

PP-Sv-15
TU U28.7-21459234-022:2012

1,6 – 2,6

СО2, Аr + CO2

The wire is used for mechanized welding in shielding gases (СО2, Ar + СО2) of critical metal structures from high-strength low-alloyed steels

12

PP-Sv-16
TU U28.7-21459234-022:2012

1,6 – 2,6

СО2, Аr + CO2

The wire is used for mechanized welding in shielding gases (СО2, Ar + СО2) of critical metal structures from low-carbon and low-alloyed steels

13

PP-Sv-17
TU U28.7-21459234-022:2012

1,6 – 2,6

СО2, Аr + CO2

The wire is used for mechanized welding in shielding gases (СО2, Ar + СО2) of critical metal structures from high-strength low-alloyed steels

14

PP-Sv-1S
TU U28.7-21459234-022:2012

2,0 – 3,2

Self-shielded, Ar, Аr + CO2

The wire is used for open arc mechanized welding, or in argon environment, Аr + СО2 of 12Kh18N9Т, 08Kh18N10, 08Kh18N10Т high-alloyed steels.

15

PP-Sv-2S
TU U28.7-21459234-022:2012

2,0 – 3,2

Self-shielded

The wire is designed for open arc mechanized welding of composite joints from pearlitic steels of the types 30G, St3, etc with austenitic steels

16

PP-Sv-3S
TU U28.7-21459234-022:2012

1,6 – 3,0

Self-shielded, СО2, Аr + CO2

The wire is used for open arc mechanized welding, as well as in carbon dioxide, Аr + СО2 mixture environment of middle-alloyed and high-strength carbon steels

17

PP-Sv-4S
TU U28.7-21459234-022:2012

2,2 – 3,6

Self-shielded, СО2, Аr + CO2, Flux

The wire is designed for open arc mechanized welding, as well as in carbon dioxide, Аr + СО2 mixture environment and submerged welding beneath a layer of flux of the brands AN-26, AN-20, stainless steels

18

PP-Sv-5S
TU U28.7-21459234-022:2012

1,6 – 3,0

Self-shielded

The wire is used for open arc mechanized welding, as well as for patch weldings and surfacing on products from high-alloyed corrosion-resistant steels

19

PP-Sv-6S
TU U28.7-21459234-022:2012

1,6 – 3,0

Self-shielded, СО2, Аr + CO2

The wire is used for open arc mechanized welding, as well as shielding gases environment for patch weldings and surfacing of stainless steels

20

PP-Sv-7S
TU U28.7-21459234-022:2012

2,2 – 3,2

Self-shielded, Ar, Аr + CO2

The wire is used for open arc mechanized welding, or in argon environment, Аr + СО2 of high-alloyed corrosion-resistant chromium-nickel-molybdenum steels

21

PP-Sv-8S
TU U28.7-21459234-022:2012

2,2 – 3,2

Self-shielded, СО2, Ar, Аr + CO2

The wire is designed for open arc mechanized welding, in carbon dioxide, argon or Аr + СО2 environment of middle-alloyed hardening steels

22

PP-Sv-9S
TU U28.7-21459234-022:2012

2,2 – 3,2

Self-shielded, СО2, Аr, Аr + CO2

The wire is used for open arc mechanized welding, in carbon dioxide, argon or Аr + СО2 environment of ferritic austenitic high-alloyed steels

23

PPR-1
TU U28.7-21459234-022:2012

2,0 – 2,8

 

The wire is designed for mechanized underwater cutting of steels up to 40 mm thick at the depths up to 60 m in fresh and sea water.

24

PP-ANCh-2S
TU U28.7-21459234-022:2012

1,6 – 3,0

Self-shielded

The wire is used for automatic and semi-automatic welding, patch welding of casting defects on the products from SCh 20-36 cast iron and others with flaked graphite

25

PP-ANCh-5M
TU U28.7-21459234-022:2012

1,6 – 3,0

Self-shielded

The wire is used for automatic and semi-automatic welding, patch welding of casting defects on the cast iron parts with globular graphite of VCh brands

26

PPChZhN-1
TU U28.7-21459234-022:2012

1,6 – 2,2

Self-shielded

The wire is designed for welding gray and high-strength cast iron and compounds with steel without products heating.

27

PP-AN1 self-shielded
GOST 26271-84*TU U28.7-21459234-022:2012

2.8

Self-shielded

SELF-SHIELDED welding of low-carbon constructional steels with lower position of welds. It is used for welding in machine building, welding

28

PP-AN57
GOST 26271 PG-59-А3V*AWS A5.29 E100T1-K3*EN 758 T50 3 1 Ni Mo BCM 3H5

1.8

Self-shielded

Semi-automatic welding of low-alloyed steels, high-strength steels of the type 30KhGSNA, 27KhGSNML. It is recommended for welding in heavy engineering industry

29

PP-AN7 self-shielded
GOST 26271-84 PS-44-А2G*AWS A5.20 E71T-G*EN 758-T 42 2 PC 2 H5

2,0–2,4

Self-shielded

SELF-SHIELDED welding during site works, building metal structures, reservoirs, metal structures of energy-generating buildings

30

PP-AN 8
GOST 26271-84 PG-44-А2N*AWS A5.29-95 E70T1*EN 758-T 42 3PC 1 H5

2,2-2,8

Аr+CO2

Welding of building structures of high-altitude sites and mining equipment

31

PP-AN 19N self-shielded
GOST 26271-84PS-39-А2(R)VP*AWS A5.20 E71T-G*EN 758-T 39 2PC 3 H5

2,4-3,0

Self-shielded

SELF-SHIELDED welding of reservoirs, bridges, metallurgical complexes; puddle welding for fittings.

Welding Wire - How to Choose It?

It would be rather difficult for a common person to choose wire for welding. The reason is that it is not so easy to find a proper material. Wire for welding is a wire, which is cored with flux and metallic powder. If you need to purchase similar things, you may kindly contact us. We will definitely assist you to choose the most necessary and high-quality things. This wire can be used for different types of weldings.

Qualitative and Prompt Welding of Metal

Anything may happen during your work, that's why it is necessary to repair everything at a certain moment. If you require metal welding, you should understand that everything will not happen at once. Welding can be used for many things, but you should know exactly, which materials you will need for this. You will find a vast choice of goods in our shop, which will enable you to make a qualitative and prompt welding.

Welding of Cast Iron Is No More a Problem!

Cast iron is used in many industries. Machine building, metallurgy and other kinds of industry are just unable to do without it. Things made from cast iron are characterized by their strength and durability. This is really a very qualitative material. Of course, its operative weldability is rather poor, but iron cast welding is widely spread in any industry. In our shop you will find all necessary things for welding this or that material. We will recommend you only qualitative products and services.

In Some Situations Welding Wire Is Irreplaceable

This wire really has a lot of advantages. Now you do not need to change all the product. It is enough to purchase this wire from us and you will be able to correct different deficiencies and defects of the product. The welding wire will properly suit all types of welding. It is not important, whether it will be cast iron or metal, at any case you will be satisfied with the result.

Address

Kyiv, Peremohy sq, 65

Contacts

  • Tel.:  (044) 200-80-25
  • Tel.:  (044) 200-85-17
  • E-mail: info@elna.com.ua