PP-AN1
Flux-cored wire for open arc welding of low-carbon and low-alloy steel structures.
| Diameter, mm | 1.2 - 4.0 |
| Curent type / Shielding | DC+ / Open arc |
| Core type | Rutile-organic |
| Applications |
Welding of general purpose metal structures, process vessels and pipelines, assemblies of agricultural machinery, railway equipment, etc. |
- Steady arcing, fine-droplet metal transfer, good weld formation, deep weld penetration in the base metal.
- Uniform slag coverage of the weld and easy slag separation.
- Wire consumption ratio KC = 1.1 ~ 1.2.
OPERATING CONDITIONS
|
Wire diameter, mm |
Current, A |
Voltage, V |
Wire stick-out, mm |
|
2.4 |
200 – 300 |
25 – 28 |
15 – 35 |
|
2.8 |
220 – 320 |
26 – 31 |
15 – 40 |
|
3.0 |
240 – 340 |
27 – 30 |
20 – 40 |
|
3.2 |
260 – 360 |
27 – 30 |
20 – 40 |
Typical chemical composition and mechanical properties of the weld metal
|
C |
Mn |
Si |
S |
P |
|
0.06 ... 0.1 |
0.6…1.0 |
max 0.15 |
max 0.04 |
max 0.04 |
|
Ultimate tensile strength, UTS, MPa |
Yield point,σY,MPa |
Tensile strain, δ,% |
Impact toughness, KCV, αnotch, J/cm², at t°C |
||
+ 20 |
- 20 |
- 40 |
|||
|
460 – 550 |
- |
min 16 |
min 80 |
- |
- |