Other TM
FLUX EFA-1
Basic agglomerated flux is designed for DC arc welding and deposit welding
Order form
Additional Information
| Suitable for: | |
| • | Non-stabilised austenitic stainless steels |
| • | Martensitic and ferritic stainless steels |
| • | An exhaustive range of ELNA hardfacing wires |
| • | attractive appearance and easy slag wash-out from the weld root |
| • | easy slag separation even with narrow welds |
| • | neutral influence on chemical composition of the weld deposit |
Flux consumption
| Voltage, V | Flux-to-wire consumption ratio, kg |
| 26 | 0.7 |
| 29 | 0.9 |
| 32 | 1.1 |
| 35 | 1.3 |
Current type: DC
Basicity index: 2.2
Granulometry, mm: 0.2 - 1.6
Preparation: if the flux has taken up moisture, it is recommended to dry it at 350-400°C during minimum
two hours
CHEMICAL COMPOSITION
|
CaF2 |
SiO2+TiO2 |
CaO+MgO |
Al2O3+MnO |
Ka2O+Na2O |
|
22 |
20 |
37.5 |
18 |
2.5 |
Similar products