Surfacing

PP-Np-35V9H3SF (Np-35W9Cr3SiV)

Flux-cored wire for submerged-arc or gas-shielded hardfacing of parts exposed to thermal fatigue and high relative pressure.

Order form

Additional Information

Diameter, mm	1.6 - 4.0
Curent type / Shielding	DC+ / Flux, Ar, Ar + CO₂
Working conditions	Thermal fatigue and high relative pressure
Applications	Hardfacing of hot pipe and section rolling steel rolls, metal hot-cutting blades, hammer heads, coiler pulling rollers, brake pulleys, etc.

Recommended flux	EFA-1, АN-26S/P, АN-20S/P
Slag separation	good
Deposit factor, g/A·h	10 - 16
Crack susceptibility	increased
Wire consumption, kg	1.05
Hardness of weld metall	HRC 41 - 54

OPERATING CONDITIONS (submerged arc)

Wire diameter, mm	Current, A	Voltage, V	Deposition rate, m/h
1.6	140 – 200	25 – 28	10 – 14
2.0	160 – 240	25 – 29	12 – 17
2.4	200 – 290	26 – 30	15 – 19
2.8	260 – 330	29 – 31	18 – 22
3.2	280 – 380	29 – 33	19 – 23

Download

Similar products

PP-Np-45

Flux-cored wire for automatic and semi-automatic gas-shielded hardfacing of parts exposed to increased temperatures and substantial relative pressure.

PP-Np-90G13N4(PP-AN105)

Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.

PP-Np-150H

Flux-cored wire for automatic and semi-automatic open-arc or gas-shielded hardfacing of parts exposed to severe gas- and hydro-abrasive wear with extra heavy loads.

PP-Np-18 (PP-Np-18CrMnSi)

Designed for automatic and semi-automatic submerged-arc or gas-shielded hardfacing of carbon steel parts exposed to metal-to-metal friction.

PP-AN180MN

Flux-cored wire for carbon dioxide (CO 2 ) shielded or open arc machine hardfacing of steel parts and assemblies exposed to metal-to-metal friction.

PP-Np-100H

Flux-cored wire for automatic and semi-automatic open-arc or gas-shielded hardfacing of parts exposed to high impact loads and severe abrasive wear at normal or sub-zero temperatures.

PP-Np-35V9H3SF (Np-35W9Cr3SiV)

Current, A

Voltage, V