Surfacing

PP-Np-19GST ( 19MnSiTi )

Self-shielding flux-cored wire is designed for hardfacing of parts made of carbon structural steel, exposed to metal-to-metal friction.

Order form

Additional Information

Diameter, mm	1.2 - 4.0
Curent type / Shielding	DC+ / Open arc
Working conditions	Metal-to-metal friction
Applications	Hardfacing of axles, shafts, rail car wheels, railway vehicle parts, resizing of carbon steel parts, etc.

Weld formation	good
Slag separation	good
Deposit factor, g/A·h	10 - 15
Crack susceptibility	low
Wire consumption per, kg	1.1 - 1.25
Hardness (3-layer deposit on mild steel)	HRC 26 - 35

OPERATING CONDITIONS

Wire diameter, mm	Current, A	Voltage, V	Deposition rate, m/h	Wire stick-out, mm
1.6	150 – 230	23 – 27	10 – 15	30 – 40
2.0	180 – 280	24 – 28	15 – 20	30 – 40
2.4	220 – 320	25 – 28	20 – 25	30 – 40
2.8	250 – 350	27 – 30	20 – 25	30 – 40

Download

Similar products

PP-Np-10H14T (Np-10Cr14Ti)

Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to high temperatures, high relative pressures, and a corrosive environment.

PP-Np-45V9H3SF (Np-45W9Cr3SiV)

Flux-cored wire for submerged-arc hardfacing of parts exposed to thermal fatigue and substantial relative pressure.

PP-Np-80H20R3T (PP-AN170)

Flux-cored wire for open-arc hardfacing of steel parts exposed to abrasive wear.

ПП-АН185М/1

Flux cored wire for submerged-arc or open arc hardfacing of medium-carbon high alloy which is resistant to metal-to-metal friction, as well as heat- and temperature-resistant.

Hardsteel 45

Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of steel mill rolls exposed to metal-to-metal friction, cyclic thermal load and corrosion.

PP-AN180MN

Flux-cored wire for carbon dioxide (CO 2 ) shielded or open arc machine hardfacing of steel parts and assemblies exposed to metal-to-metal friction.

PP-Np-19GST ( 19MnSiTi )

Current, A

Voltage, V