Surfacing

PP-Np-14GST ( 14MnSiTi )

Self-shielding flux-cored wire is designed for hardfacing of parts made of carbon structural steel, exposed to metal-to-metal friction.

Order form

Additional Information

Diameter, mm	1.2 - 4.0
Curent type / Shielding	DC+ / Open arc
Working conditions	Metal-to-metal friction
Applications	Hardfacing of axles, shafts, rail car wheels, railway vehicle parts, resizing of carbon steel parts, etc.

Weld formation	good
Slag separation	good
Deposit factor, g/A·h	10 - 16
Crack susceptibility	low
Wire consumption, kg	1.1 - 1.25
Hardness (3-layer deposit on mild steel)	HB 220 - 280

OPERATING CONDITIONS

Wire diameter, mm	Current, A	Voltage, V	Deposition rate, m/h	Wire stick-out, mm
1.6	160 – 210	23 – 26	9 – 13	30 – 40
2.0	200 – 260	24 – 27	12 – 17	30 – 40
2.2	220 – 280	25 – 28	13 – 18	30 – 40
2.8	280 – 340	26 – 29	15 – 22	30 – 40

Download

Similar products

Трансрейл 48

Flux-cored wire for automatic and semi-automatic open-arc hardfacing of parts exposed to metal-to-metal friction and abrasive wear.

PP-Np-20H

Flux-cored wire for submerged-arc, open arc, or gas-shielded hardfacing of parts exposed to metal-to-metal friction, heating up to 450°C, and chemically active environment.

PP-Np-90G13N4(PP-AN105)

Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.

PP-Np-45

Flux-cored wire for automatic and semi-automatic gas-shielded hardfacing of parts exposed to increased temperatures and substantial relative pressure.

ПП-АН185М/1

Flux cored wire for submerged-arc or open arc hardfacing of medium-carbon high alloy which is resistant to metal-to-metal friction, as well as heat- and temperature-resistant.

PP-Np-20H4

Flux-cored wire for open-arc and submerged-arc hardfacing of parts exposed to thermal fatigue and high relative pressure.

PP-Np-14GST ( 14MnSiTi )

Current, A

Voltage, V