Surfacing

PP-Np-200H15S1GRT (PP-AN125)

Flux-cored wire for open-arc hardfacing of parts exposed to abrasive wear.

Order form

Additional Information

Diameter, mm	1.6 - 4.0
Curent type / Shielding	DC+ / Open arc
Working conditions	Abrasive wear
Applications	Hardfacing of excavator bucket teeth, lips and walls, grizzly bars, grader and bulldozer blades, grousers, tracked vehicle undercarriage links and sprockets, etc.

Weld formation	good
Slag separation	almost no slag
Deposit factor, g/A·h	12 - 16
Crack susceptibility	increased
Wire consumption per, kg	1.1 - 1.2
Hardness (3-layer deposit on mild steel)	HRC 46 - 58

OPERATING CONDITIONS

Wire diameter, mm	Current, A	Voltage, V	Deposition rate, m/h	Wire stick-out, mm
1.6	160 – 220	24 – 26	10 – 14	30 – 40
2.0	180 – 250	25 – 27	12 – 17	30 – 40
2.4	200 – 290	26 – 28	15 – 19	30 – 40
2.8	260 – 340	26 – 28	18 – 22	30 – 40

Download

Similar products

PP-Np-30H20

Flux-cored wire for submerged-arc, open arc or gas-shielded hardfacing of parts exposed to cyclic loads, corrosion, cavitation erosion, and metal-to-metal friction.

PP-Np-100H

Flux-cored wire for automatic and semi-automatic open-arc or gas-shielded hardfacing of parts exposed to high impact loads and severe abrasive wear at normal or sub-zero temperatures.

PP-Np-30H

Flux-cored wire for open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to severe abrasive wear and corrosion along with moderate loads at normal or increased temperatures (up to 450°C).

PP-Np-25H5FMS

Flux-cored wire for submerged-arc or gas-shielded hardfacing of parts exposed to cyclic thermal load and severe wear.

PP-Np-30H4G2M (PP-AN128)

Flux-cored wire for open-arc and submerged-arc hardfacing of parts exposed to metal-to-metal friction with extra alternating and impact loads.

PP-Np-90G13N4(PP-AN105)

Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.

PP-Np-200H15S1GRT (PP-AN125)

Current, A

Voltage, V