Surfacing

PP-Np-90G13N4(PP-AN105)

Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.

Order form

Additional Information

Diameter, mm	1.6 - 4.0
Curent type / Shielding	DC+ / Open arc
Working conditions	Metal-to-metal friction
Applications	Hardfacing of wear-resistant pads on parts subject to heavy impacts.

Weld formation	good
Slag separation	good
Deposit factor, g/A·h	10 - 16
Crack susceptibility	moderate
Wire consumption, kg	1.1 - 1.15
Hardness (3-layer deposit on mild steel)	HB 160 - 240

OPERATING CONDITIONS

Wire diameter, mm	Current, A	Voltage, V	Deposition rate, m/h	Wire stick-out, mm
1.6	140 – 220	22 – 24	10 – 14	30 – 40
2.0	180 – 250	23 – 25	12 – 17	30 – 40
2.4	200 – 290	24 – 25	15 – 19	30 – 40
2.8	250 – 350	24 – 26	18 – 22	30 – 40

Download

Similar products

PP-Np-30H5G2SM (Np-30Cr5Mn2SiMo)

Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to metal-to-metal friction with extra alternating and impact loads.

PP-Np-100H

Flux-cored wire for automatic and semi-automatic open-arc or gas-shielded hardfacing of parts exposed to high impact loads and severe abrasive wear at normal or sub-zero temperatures.

PP-AN163M/1

Flux-cored wire for automatic and semi-automatic open-arc or submerged-arc hardfacing of parts exposed to cyclic loads, corrosion, cavitation erosion, and metal-to-metal friction.

PP-Np-45

Flux-cored wire for automatic and semi-automatic gas-shielded hardfacing of parts exposed to increased temperatures and substantial relative pressure.

PP-Np-80H20R3T (PP-AN170)

Flux-cored wire for open-arc hardfacing of steel parts exposed to abrasive wear.

PP-Np-50H3ST (Np-50Cr3SiTi)

Flux-cored wire for open-arc hardfacing of parts exposed to metal-to-metal friction and abrasive wear.

PP-Np-90G13N4(PP-AN105)

Current, A

Voltage, V