Surfacing

PP-Np-80H20R3T (PP-AN170)

Flux-cored wire for open-arc hardfacing of steel parts exposed to abrasive wear.

Order form

Additional Information

Diameter, mm	3.2
Curent type / Shielding	DC+ / Open arc
Working conditions	Abrasive wear
Applications	Hardfacing of excavator bucket teeth, lips and walls, grizzly bars, grader and bulldozer blades, grousers, sludge pumps, etc..

Weld formation	good
Slag separation	almost no slag
Deposit factor, g/A·h	10 - 15
Crack susceptibility	increased
Wire consumption, kg	1.1 - 1.2
Hardness (3-layer deposit on mild steel)	HRC 58 - 67

OPERATING CONDITIONS

Wire diameter, mm

Current, A

Voltage, V

Deposition rate, m/h

Wire stick-out, mm

3.2

400 – 420

30 – 32

20 – 25

30 – 40

Download

Similar products

PP-Np-18 (PP-Np-18CrMnSi)

Designed for automatic and semi-automatic submerged-arc or gas-shielded hardfacing of carbon steel parts exposed to metal-to-metal friction.

PP-Np-90G13N4(PP-AN105)

Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.

Hardsteel 54

Flux-cored wire for automatic and semi-automatic open-arc hardfacing of carbon or low-alloy steel parts exposed to metal-to-metal friction, alternating and impact loads at normal and increased temperatures.

PP-Np-20H4

Flux-cored wire for open-arc and submerged-arc hardfacing of parts exposed to thermal fatigue and high relative pressure.

PP-Np-30H4G2M (PP-AN128)

Flux-cored wire for open-arc and submerged-arc hardfacing of parts exposed to metal-to-metal friction with extra alternating and impact loads.

PP-Np-30H5G2SM (Np-30Cr5Mn2SiMo)

Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to metal-to-metal friction with extra alternating and impact loads.