1. Home
  2. Product
  3. LLC «NPF «ELNA»
  4. Surfacing
  5. PP-AN180MN
Surfacing

PP-AN180MN

Flux-cored wire for carbon dioxide (CO2) shielded or open arc machine hardfacing of steel parts and assemblies exposed to metal-to-metal friction.

Order form 
Additional Information
Diameter, mm 1.2 - 4.0
Curent type / Shielding DC+ / Open arc, CO2
Working conditions Metal-to-metal friction.
Applications

Reconditioning of railway vehicle parts and assemblies, shafts, axles, bushings, rail joint ends, tongues, rail car couplers, parts of agricultural equipment, etc.
Weld formation good
Slag separation good
Deposit factor, g/A·h 10 - 15
Crack susceptibility  low
Wire consumption per, kg 1.1 - 1.15
Hardness (3-layer deposit on mild steel) HRC 24 - 34

OPERATING CONDITIONS (CO2-shielded)

Wire diameter, mm

Current, A

Voltage, V

Gas flow rate, L/min.

Deposition rate, m/h

1.2

70 – 150

23 – 27

4 – 7

7 – 14

1.6

150 – 230

24 – 28

6 – 10

8 – 15

2.4

220 – 320

25 – 32

10 – 14

13 – 20

2.8

260 – 380

25 – 32

12 – 16

14 – 22
Similar products
PP-Np-90G13N4(PP-AN105)
Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.
more 
PP-Np-30H5G2SM (Np-30Cr5Mn2SiMo)
Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to metal-to-metal friction with extra alternating and impact loads.
more 
PP-Np-35V9H3SF (Np-35W9Cr3SiV)
Flux-cored wire for submerged-arc or gas-shielded hardfacing of parts exposed to thermal fatigue and high relative pressure.
more 
PP-Np-45
Flux-cored wire for automatic and semi-automatic gas-shielded hardfacing of parts exposed to increased temperatures and substantial relative pressure.
more 
Hardsteel 50
Flux-cored wire for automatic and semi-automatic submerged-arc hardfacing of parts exposed to metal-to-metal friction, cyclic thermal load and high relative pressure.
more 
PP-Np-18H1G1M (PP-AN120)
Flux-cored wire for automatic and semi-automatic submerged-arc or gas-shielded hardfacing of carbon steel parts exposed to metal-to-metal friction and abrasive wear.
more