1. Home
  2. Product
  3. LLC «NPF «ELNA»
  4. Surfacing
  5. PP-Np-10H14T (Np-10Cr14Ti)
Surfacing

PP-Np-10H14T (Np-10Cr14Ti)

Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to high temperatures, high relative pressures, and a corrosive environment.

Order form 
Additional Information
Diameter, mm 2.0 - 4.0
Curent type / Shielding DC+ / Open arc, flux, Ar, СО2, Ar + CO2
Working conditions High temperatures and pressures, corrosive environment
Applications

Hardfacing of plungers, sealing surfaces of general purpose industrial, gas and oil fittings, stems of hydraulic fixtures, hydraulic cylinders.
Recommended flux  EFA-1, АN-26S/P, АN-20S/P
Slag separation good
Deposit factor, g/A·h 12 - 16
Crack susceptibility low
Wire consumption, kg 1.05 - 1.2
Hardness of weld metall HRC 38 - 46

OPERATING CONDITIONS (Ar + CO2)

Wire diameter, mm

Current, A

Voltage, V

Deposition rate, m/h

1.6

140 – 220

26 – 28

10 – 14

2.0

170 – 250

27 – 29

12 – 17

2.4

200 – 300

28 – 30

15 – 19

2.8

250 – 330

29 – 31

18 – 22
Similar products
PP-Np-20H
Flux-cored wire for submerged-arc, open arc, or gas-shielded hardfacing of parts exposed to metal-to-metal friction, heating up to 450°C, and chemically active environment.
more 
PP-Np-180H9
Flux-cored wire for automatic and semi-automatic open-arc hardfacing of parts exposed to severe abrasive wear. 
more 
PP-Np-100H
Flux-cored wire for automatic and semi-automatic open-arc or gas-shielded hardfacing of parts exposed to high impact loads and severe abrasive wear at normal or sub-zero temperatures.
more 
PP-Np-19GST ( 19MnSiTi )
Self-shielding flux-cored wire is designed for hardfacing of parts made of carbon structural steel, exposed to metal-to-metal friction.
more 
PP-AN163M
Flux-cored wire for automatic and semi-automatic submerged-arc or open arc hardfacing of parts exposed to cyclic loads, corrosion, cavitation erosion, and metal-to-metal friction. 
more 
Hardsteel 59A
Flux-cored wire for automatic and semi-automatic gas-shielded hardfacing of chromium carbide-hardened martensitic steel pad on the surface of parts exposed to severe abrasive wear and relatively high impact loads.
more