1. Home
  2. Product
  3. LLC «NPF «ELNA»
  4. Surfacing
  5. PP-Np-45
Surfacing

PP-Np-45

Flux-cored wire for automatic and semi-automatic gas-shielded hardfacing of parts exposed to increased temperatures and substantial relative pressure.

Order form 
Additional Information
Diameter, mm 1.6 - 4.0
Curent type / Shielding DC+ / Ar, СО2, Ar + CO2
Working conditions Increased temperatures and substantial relative pressure
Applications

Hardfacing of metal hot-cutting blades, stamping and pressing tools, augers, mixer parts, fan blades, etc.
Weld formation good
Slag separation good
Deposit factor, g/A·h 10 - 16
Crack susceptibility  moderate
Wire consumption per, kg 1.1 - 1.15
Hardness (3-layer deposit on mild steel) HRC 52 - 58

OPERATING CONDITIONS (CO2 -shielded) 

Wire diameter, mm

Current, A

Voltage, V

Deposition rate, m/h

СО2 flow rate,

L/min.

1.6

150 – 230

24 – 28

8 – 15

6 – 10

2.0

180 – 280

24 – 31

10 – 18

8 – 12

2.4

220 – 320

25 – 32

13 – 20

10 – 14

2.8

260 – 380

25 – 32

14 – 22

12 – 16
Similar products
PP-Np-90G13N4(PP-AN105)
Flux-cored wire for automatic and semi-automatic open arc hardfacing of wear-resistant pads on parts subject to heavy impacts.
more 
PP-Np-19GST ( 19MnSiTi )
Self-shielding flux-cored wire is designed for hardfacing of parts made of carbon structural steel, exposed to metal-to-metal friction.
more 
PP-Np-20H
Flux-cored wire for submerged-arc, open arc, or gas-shielded hardfacing of parts exposed to metal-to-metal friction, heating up to 450°C, and chemically active environment.
more 
PP-AN163
Flux-cored wire for automatic and semi-automatic open-arc, submerged-arc or gas-shielded hardfacing of parts exposed to cyclic loads, corrosion, cavitation erosion, and metal-to-metal friction.
more 
Hardsteel 54
Flux-cored wire for automatic and semi-automatic open-arc hardfacing of carbon or low-alloy steel parts exposed to metal-to-metal friction, alternating and impact loads at normal and increased temperatures.
more 
PP-Np-180H9
Flux-cored wire for automatic and semi-automatic open-arc hardfacing of parts exposed to severe abrasive wear. 
more